Penetrating Stain
Soaks into the timber and blocks UV without forming a peeling film. It suits cladding, fences and decks. It is easy to recoat.
Al Salam Tower, Office 15B, Al Barsha, DubaiEvery day, 8am to 10pm
Wood Staining
Any exterior timber in Dubai, from doors and shutters to planters, screens and decks, needs protection from UV, heat, humidity and sprinkler water. We seal exterior wood with penetrating stains, oils or exterior paints chosen for its exposure.
A door under a porch and a planter beside a sprinkler need different protection. We match the system to each surface rather than using one product for everything.
End grain soaks up water like a straw. Extra coats on ends and joints are what stop splitting and rot.
For decks, see deck staining. For cladding, see exterior cladding staining, and for walls, waterproof wall coatings.
01 / Systems
Soaks into the timber and blocks UV without forming a peeling film. It suits cladding, fences and decks. It is easy to recoat.
Nourishes hardwoods and repels water. It gives a natural, matt look. It suits teak and furniture.
Primer and topcoats that form a protective colour layer. It suits softwood and painted joinery. It must be kept intact.
Clear treatment that makes water bead off. It suits planters and sprinkler zones. It is often combined with stain.
02 / Process
We look at sun, water and wear for each surface.
Timber is cleaned, sanded and dried.
Cut ends and joints get extra coats, as they absorb water most.
The chosen stain, oil or paint system is applied.
Weather Ready
Exterior wood needs protection matched to its exposure.
We seal timber with stains, oils or paint systems.
Pricing Guide
Sealing is priced per square metre or item.
*Prices shown are starting guides only. They vary and can change depending on your requirements, the size of the job, the surface, the materials and access to your building. You agree the final price before any work begins.
Two coats.
From AED 35*/m²
Two coats.
From AED 35*/m²
Primer and two coats.
From AED 40*/m²
Per item.
From AED 150*
Tools and Materials
UV protection without peeling. Lasting. Easy recoat.
Nourishes and repels water. Natural. Warm.
Protective colour system. Durable. Clean.
Water beads off. Less swelling. Longer life.
Based in Al Barsha since 2014, we work across every Dubai community with trade-specialist technicians and a workmanship guarantee on every job.
Each surface gets the right protection. Lasts. Value.
Extra coats where water enters. No splits. Smart.
You know when to refresh. Easy upkeep. Lasting.
Doors to planters. One team. Simple.
Indoor wood is usually recoated every few years. Outdoor timber in Dubai sun needs re-oiling or restaining every 6 to 12 months, and handrails or floors in busy areas every 12 to 24 months.
Paint covers the wood with an opaque colour and hides the grain. Stain soaks in and changes the colour while keeping the grain visible. Varnish or lacquer is a clear protective coat on top. Many jobs combine a stain with a varnish or oil.
Matte looks natural and hides marks, satin is a practical middle ground for furniture and doors, and gloss is the most wipeable but shows scratches. Most Dubai homes choose matte or satin.
We stock natural, oak, teak, walnut, mahogany, ebony, grey and white-wash tones from trusted brands, and can mix custom shades. We test samples on your timber before staining.
Areas We Cover
We weatherproof exterior timber across Dubai.
Send photos and we will recommend a system.