Moisture-Resistant MDF
Green-core MDF that handles humidity better than standard board. It is the usual base for painted wardrobes and cabinets. It machines cleanly for smooth, modern profiles.
Custom Carpentry in Dubai
Off-the-shelf furniture rarely fits a Dubai apartment perfectly. Alcoves are odd sizes, ceilings are high and storage is always short. Our carpenters build wardrobes, cabinets and furniture to measure, and repair the doors, frames and woodwork you already have.
Repairs from
AED 150*
Final price depends on your requirements and is agreed before work starts.
At a Glance
- Repairs From: AED 150*
- Custom Builds: Made to measure
- Boards: MR MDF, ply, hardwood
- Since: 2014
Built to Fit
Carpentry Made for Dubai Homes
Good carpentry fits the room, uses the right board for the climate and is finished properly.
From built-in wardrobes to a sticking drawer, our carpenters build new pieces and repair what you have.
- Made to measure
- Moisture-resistant boards
- Repairs and new builds
- Clean installation
Our Services
Carpentry Services in Dubai
Choose a carpentry service for details, materials and FAQs.
01Custom Furniture Design and FabricationWardrobes, TV units, desks, beds and storage designed and built to fit your room.View Service02Furniture Repair and RestorationWobbly chairs, broken drawers, scratched tables and worn finishes repaired and restored.View Service03Door/Window/Frame Installation and RepairTimber doors, door frames and window frames installed, replaced and repaired.View Service04Woodwork and TrimSkirting, architraves, mouldings and wall panelling fitted with tight, clean joints.View Service05Gypsum Board and Drywall InstallationGypsum partitions, false ceilings, bulkheads and boxing built on metal frames.View Service06Kitchen Cabinet Installation, Repair and RefacingKitchen cabinets installed, hinges and doors repaired, and old fronts refaced.View Service07Outdoor WoodworkPergolas, decking, planters and garden furniture built for Dubai sun and heat.View Service08General Home and Office Carpentry RepairsSmall carpentry jobs at home and in the office, grouped into one visit.View Service
Materials
Carpentry Boards and Woods Used in Dubai
Marine Plywood
Plywood bonded with waterproof glue that resists damp and swelling. It is used under sinks, in bathrooms and for outdoor carcasses. It holds screws strongly.
Block Board
Solid timber strips faced with veneer, light and stiff for long shelves and doors. It resists sagging better than chipboard. It suits tall wardrobe doors.
Solid Hardwood
Oak, teak, beech and meranti for doors, frames, tops and outdoor work. It can be sanded and refinished for decades. It costs more but lasts the longest.
Carpentry for Dubai Apartments and Villas
Humidity is the main enemy of woodwork in Dubai. Standard chipboard swells near kitchens, bathrooms and balcony doors, so we use moisture-resistant MDF or marine plywood wherever damp is likely, and seal every cut edge.
A carpenter who builds and repairs also saves you money. Many wardrobe and cabinet problems are a loose hinge, a failed drawer slide or a dropped door, fixed in minutes rather than replaced.
For hardware upgrades, see door hardware installation. For flat-pack furniture, see IKEA furniture assembly, and for shelves, shelving installation.
Send a Sketch
A rough sketch with measurements and a photo of the space is enough for a first estimate on custom work.
Workshop Built
Custom pieces are cut and finished in the workshop, so installation day at home is quick and clean.
Pricing Guide
Carpentry Cost in Dubai
Repairs are priced per visit. Custom furniture is quoted per piece after measuring.
Carpentry Repair Visit
From AED 150*
Small repairs, several items.
Built-In Wardrobe
Quoted per metre
Board, finish and hardware.
Kitchen Cabinet Repair
From AED 150*
Hinges, doors, drawers.
Skirting and Trim
Quoted per metre
Supply and fit.
*Prices shown are starting guides only. They vary and can change depending on your requirements, the size of the job, the surface, the materials and access to your building. You agree the final price before any work begins.
- Site visit and measuring
- Material advice
- Drawing agreed for custom work
- Workshop fabrication
- Edges sealed
- Installation and levelling
- Hardware adjusted
- Site cleaned
Tools and Materials
Tools, Materials and Products We Use for Carpentry
MR MDF
Moisture-resistant board for painted and laminated furniture. It resists swelling. It gives a smooth finish.
Marine Plywood
Waterproof-bonded plywood for damp areas. It holds screws firmly. It suits sinks and bathrooms.
Soft-Close Hardware
Hinges and drawer slides that close quietly. They protect doors and fingers. They last years.
Edge Banding
PVC or veneer edging that seals board edges. It stops moisture getting in. Edges look clean.
Why Choose Wamtech Services for Carpentry in Dubai
Based in Al Barsha since 2014, we work across every Dubai community with trade-specialist technicians and a workmanship guarantee on every job.
Right Board for the Room
We choose moisture-resistant boards where damp is likely. Furniture does not swell. It lasts longer.
Repair First
If a hinge or slide fixes the problem, we say so. You do not replace good furniture. You save money.
Workshop Finish
Custom pieces are finished in the workshop. Paint and edges are clean. Installation is quick.
Clear Quotes
Material, hardware and labour are agreed before work. No surprises. Prices vary only with the agreed scope.
Custom Carpentry in Dubai: Frequently Asked Questions
How Much Does Custom Woodwork Cost in Dubai?
Small carpentry repairs start from AED 150 per visit. Custom furniture is quoted per piece based on size, board type, hardware and finish, and the quote is agreed before work starts. Prices vary and can change depending on your exact requirements, the materials and access to the property, so the final price is confirmed after we see photos or visit.
Can I Get Custom-Made Furniture from Carpentry Services in Dubai?
Yes. Wardrobes, TV units, shelving, desks, beds and storage can be designed and built to the exact size of your room. We agree the drawing, material and finish with you before anything is cut.
Which Wood Is Most Used in Dubai?
Moisture-resistant MDF and plywood are the most used boards for wardrobes and kitchens, finished with laminate, veneer or paint. Solid hardwoods such as oak, teak and meranti are used for doors, frames and outdoor work.
What Are the Most Common Carpentry Services in Dubai Homes?
Wardrobe and kitchen cabinet repairs, door and frame adjustments, hinge and drawer slide replacement, skirting and trim, shelving and custom built-in storage are the jobs we do most often.
How Long Does a Typical Carpentry Job Take?
Most repairs take one to three hours. Custom furniture usually takes one to three weeks to build in the workshop, plus one day to install.
Other Carpentry, Door and Furniture Services
Areas We Cover
Carpentry Across Dubai
Our carpenters work in apartments, villas and offices across Dubai.
New Dubai and the Coast
- Dubai Marina
- JBR
- JLT
- Palm Jumeirah
- Al Sufouh
- Discovery Gardens
- Al Furjan
Central Dubai
- Downtown Dubai
- Business Bay
- DIFC
- Jumeirah
- Umm Suqeim
- Al Barsha
- Tecom
- The Greens
Villa Communities
- Arabian Ranches
- Dubai Hills Estate
- Emirates Hills
- The Springs
- The Meadows
- Damac Hills
- Motor City
- Sports City
- JVC
- JVT
- Town Square
Old Dubai and East
- Deira
- Bur Dubai
- Mirdif
- Al Warqa
- Silicon Oasis
- Al Qusais
Send Photos and Measurements
We will suggest materials and give an estimate for your carpentry job.