Straight Line Through Paint
Likely cause: Joint not feathered wide enough.
What we do: Extra coats feathered wide and sanded.
Seams from AED 150*
Drywall Taping, Mudding and Sanding Seams in Dubai
Straight lines showing through paint, cracks along the ceiling or ridges at every board joint all come from poorly finished seams. We cut out failed joints, re-tape them and apply thin coats of compound, feathered and sanded until the seam disappears.
- 01Seams From: AED 150*
- 02Tape: Paper or mesh
- 03Coats: Three feathered
- 04Finish: Invisible
Diagnose
Seam Problems We Fix
Crack Along a Joint
Likely cause: Tape missing or not bedded.
What we do: Joint cut out, re-taped and finished.
Bubbled Tape
Likely cause: Tape laid without enough compound.
What we do: Loose tape removed and replaced.
Ridge at Joint
Likely cause: Compound built up too thick.
What we do: Sanded down and refinished.
Why Seams Show Through Paint
A seam disappears only when compound is feathered wide, often 30 cm or more across a flat joint. Narrow joints leave a visible line in side light, which is common in quickly finished apartments.
Joints at ceilings and around door frames move with temperature changes from AC. Mesh or paper tape bedded properly stops cracks reopening.
For cracks, see crack repairs. For whole walls, see skim coating, and for finishing, drywall painting and finishing.
Drying
Each coat dries before the next. Seam work usually takes two visits.
Dust
We vacuum sand and protect the room.
No More Lines
Seams Taped and Feathered Until They Disappear
Good seams are invisible after painting.
We re-tape, feather wide and sand flat so joints disappear.
- Re-taped
- Feathered wide
- Sanded flat
- Light checked
Process
How We Finish Drywall Seams
- 01
Embed Tape
Tape is bedded in compound so it bonds without bubbles.
- 02
Fill Coat
A second coat fills the joint slightly wider.
- 03
Finish Coat
A thin final coat is feathered well beyond the joint.
- 04
Sand
The seam is sanded flat and checked with a light.
Taping, Mudding and Sanding: FAQs
Will the Repair Be Visible, and How Do You Match the Paint?
We feather the repair beyond the damaged area, sand it smooth and prime it, then paint to the nearest corner or joint using your colour code or a matched sample, so it blends into the wall.
What Causes Cracks in Gypsum Walls?
Most cracks appear at board joints, around door frames and at corners, caused by building movement, temperature swings from AC, and joints that were not taped properly. Re-taping the joint stops most cracks returning.
How Much Does Drywall Repair Cost in Dubai?
Small hole and crack repairs start from AED 150 per visit, including painting the repair. Water-damaged sections start from AED 300, and new partitions from about AED 85 per square metre. Prices vary and can change depending on your exact requirements, the materials and access to the property, so the final price is confirmed after we see photos or visit.
How Do You Fix Large Holes in Drywall?
Large holes are cut back to a neat square, backed with timber or a metal patch, filled with a new piece of gypsum board, then taped, jointed, sanded and painted.
Pricing Guide
Drywall Taping Cost in Dubai
Seam repairs are priced per visit or per metre.
Seam Repair Visit
From AED 150*
A few joints.
Per Metre of Joint
From AED 25*/m
Re-taped and finished.
Ceiling Joints
From AED 30*/m
Re-taped and finished.
Painting After
Quoted per wall
To a break.
*Prices shown are starting guides only. They vary and can change depending on your requirements, the size of the job, the surface, the materials and access to your building. You agree the final price before any work begins.
- Joints inspected
- Failed tape removed
- Tape bedded
- Fill coat
- Finish coat
- Sanded flat
- Primed
- Painted on request
Tools and Materials
Tools, Materials and Products We Use for Drywall Taping
Paper Tape
Strong tape for flat joints. Crack resistant. Smooth.
Fibreglass Mesh Tape
Self-adhesive tape for repairs. Easy to bed. Strong.
All-Purpose Compound
Beds tape and fills joints. Sands well. Reliable.
Finishing Knives
Wide blades for feathering. Flat joints. Invisible seams.
Why Choose Wamtech Services for Drywall Taping in Dubai
Based in Al Barsha since 2014, we work across every Dubai community with trade-specialist technicians and a workmanship guarantee on every job.
Feathered Wide
Joints blended far beyond the seam. No lines. Smooth walls.
Tape Bedded Properly
No bubbles or cracks. Lasting joints. Fewer callbacks.
Light Checked
Seams checked with side light. Flat. Professional.
Clean Work
Vacuum sanding. Room protected. Tidy.
More Drywall Repair Services in Dubai
View All ServicesAll Drywall Repair ServicesAreas We Cover
Drywall Seam Repair Across Dubai
We repair drywall seams across Dubai.
New Dubai and the Coast
- Dubai Marina
- JBR
- JLT
- Palm Jumeirah
- Al Sufouh
- Discovery Gardens
- Al Furjan
Central Dubai
- Downtown Dubai
- Business Bay
- DIFC
- Jumeirah
- Umm Suqeim
- Al Barsha
- Tecom
- The Greens
Villa Communities
- Arabian Ranches
- Dubai Hills Estate
- Emirates Hills
- The Springs
- The Meadows
- Damac Hills
- Motor City
- Sports City
- JVC
- JVT
- Town Square
Old Dubai and East
- Deira
- Bur Dubai
- Mirdif
- Al Warqa
- Silicon Oasis
- Al Qusais
Send Photos of the Seams
We will quote the repair.