Hard wearing
Lacquer
Forms a tough surface film in matte, satin or gloss. Very easy to clean. Scratches need a full recoat.
- Tough film
- Easy clean
- Several sheens
Al Salam Tower, Office 15B, Al Barsha, DubaiEvery day, 8am to 10pm
Timber floors take years of sand, chair legs and sunlight in Dubai homes. Sanding takes the surface back to fresh wood, removing scratches, grey patches and worn finish. We sand hardwood, engineered and parquet floors with dust extraction, then stain if wanted and seal.
At a Glance
Fresh Timber
Sanding removes years of wear in a few days.
We sand with dust extraction and seal with lacquer or oil.
Process
We check how much timber is left to sand, which matters for engineered floors.
Floors are sanded in stages with a drum sander and edger.
Gaps are filled and stain applied if you want a new colour.
Two or three coats of lacquer or hardwax oil are applied.
Finishes
Hard wearing
Forms a tough surface film in matte, satin or gloss. Very easy to clean. Scratches need a full recoat.
Natural feel
Soaks into the wood for a natural matte look. Worn areas can be spot repaired. Needs topping up more often.
Engineered wood has a top layer of real timber over plywood. Thicker wear layers can be sanded several times, while thin ones can only take a light sand. We measure before starting.
Dust extraction sanders keep most dust out of the air, which matters in occupied apartments with central AC.
For parquet, see parquet sanding. For a lighter refresh, see hardwood floor polishing, and for new floors, parquet installation.
Pricing Guide
Priced per square metre.
From AED 45*/m²
Three coats.
From AED 50*/m²
Two coats.
From AED 10*/m²
Extra.
From AED 120*
Per tread.
*Prices shown are starting guides only. They vary and can change depending on your requirements, the size of the job, the surface, the materials and access to your building. You agree the final price before any work begins.
Tools and Materials
Flat, even sanding. Less dust. Fast.
Reaches walls and corners. Even finish. Neat.
Low odour, hard-wearing. Clear. Quick drying.
Natural matte finish. Spot repairable. Warm.
Based in Al Barsha since 2014, we work across every Dubai community with trade-specialist technicians and a workmanship guarantee on every job.
Engineered floors protected. No sand-through. Safe.
Extraction sanders. Cleaner home. Healthier.
Stain samples on your floor. Right shade. Confidence.
Water-based finishes. Back home faster. Comfortable.
A typical apartment bedroom is fitted in a day. A full two-bedroom apartment usually takes two to three days, plus drying time if the floor needs levelling first.
Yes. We work across Dubai, from Dubai Marina, JLT and Palm Jumeirah to Al Barsha, Mirdif, Arabian Ranches, Dubai Hills and Silicon Oasis.
Most click flooring needs no more than about 3 mm of variation over 2 metres. More than that and boards flex, click joints break and floors sound hollow, so we level first.
Laminate and SPC vinyl installation starts from AED 25 per square metre for labour, and from about AED 70 per square metre supplied and fitted. Levelling and skirting are quoted separately when needed. Prices vary and can change depending on your exact requirements, the materials and access to the property, so the final price is confirmed after we see photos or visit.
We sand and refinish floors across Dubai.
Based at Al Salam Tower, Office 15B, Al Barsha First
Dubai Marina, JBR, JLT, Palm Jumeirah, Al Sufouh, Discovery Gardens, Al Furjan
Downtown Dubai, Business Bay, DIFC, Jumeirah, Umm Suqeim, Al Barsha, Tecom, The Greens
Arabian Ranches, Dubai Hills Estate, Emirates Hills, The Springs, The Meadows, Damac Hills, Motor City, Sports City, JVC, JVT, Town Square
Deira, Bur Dubai, Mirdif, Al Warqa, Silicon Oasis, Al Qusais
Send photos and room sizes for a quote.