Colour
Deck Stain or Oil
Pigmented finishes that add colour and block UV. They hide greying and even out old and new boards. In Dubai's sun they last longer than clear finishes.
- Adds colour
- Strong UV block
- Evens tones
Al Salam Tower, Office 15B, Al Barsha, DubaiEvery day, 8am to 10pm
Deck Repair
A grey, dry deck can look new again. We clean off dirt and algae, brighten the timber, sand rough areas and apply a UV stain, oil or sealer, so the colour returns and water beads off instead of soaking in.
Timber has to be clean and dry for a finish to soak in. We wash and brighten the deck, then let it dry fully before coating, usually the next day in Dubai heat.
Timing matters. Applying finish in midday summer sun makes it dry too fast and look patchy. We work in the cooler morning or schedule refinishing between October and April.
For washing only, see deck washing. For furniture, see wood furniture staining, and for damaged boards, deck board replacement.
01 / Finishes
Colour
Pigmented finishes that add colour and block UV. They hide greying and even out old and new boards. In Dubai's sun they last longer than clear finishes.
Protection
Water-repellent finishes that keep the natural look. They stop water soaking in. They need re-coating more often in strong sun.
02 / Process
Dirt, algae and old finish are removed with a deck cleaner and gentle washing.
A brightener restores the timber's natural colour and opens the grain.
Rough and splintered areas are sanded smooth once the deck is dry.
Two coats of stain, oil or sealer are applied, including board ends and edges.
Colour Restored
Sun and water turn decks grey, dry and rough.
We clean, brighten, sand and coat decks so colour returns and water beads off.
Pricing Guide
Refinishing is priced per square metre including two coats.
*Prices shown are starting guides only. They vary and can change depending on your requirements, the size of the job, the surface, the materials and access to your building. You agree the final price before any work begins.
Two coats.
From AED 35*/m²
Pigmented UV stain.
From AED 40*/m²
Stripping and sanding.
Quoted on inspection
Wash and brighten.
From AED 15*/m²
Tools and Materials
Lifts dirt, grey and algae. Prepares timber. Better finish.
Restores natural timber colour. Opens the grain. Even result.
Penetrates and nourishes timber. Blocks UV. Rich colour.
Makes water bead off. Less swelling. Longer life.
Based in Al Barsha since 2014, we work across every Dubai community with trade-specialist technicians and a workmanship guarantee on every job.
Clean, brighten and dry before coating. The finish soaks in. It lasts.
We avoid midday heat. Even finish. No patchiness.
Board ends and edges are coated too. Less splitting. Full protection.
We tell you when to re-coat. The deck stays good. Easy upkeep.
Deck refinishing starts from about AED 35 per square metre for cleaning, light sanding and two coats. Heavily weathered decks are quoted after inspection. Prices vary and can change depending on your exact requirements, the materials and access to the property, so the final price is confirmed after we see photos or visit.
A stain adds colour and UV protection, while a sealer repels water without changing the colour much. Many deck oils do both. In Dubai's sun, a pigmented stain or oil lasts longer than a clear sealer.
In Dubai, timber decks usually need re-oiling or re-staining every 6 to 12 months because of strong UV. If water no longer beads on the surface or the colour has turned grey, it is time. WPC decks do not need staining, only cleaning.
Start by finding the cause: rotten boards, loose screws, a failed joist or a sinking support. Damaged boards are replaced, joists sistered or replaced, fixings renewed and the deck then cleaned and sealed.
Most decks take two days: one to clean and dry, one to sand and coat.
Areas We Cover
We stain and seal decks across Dubai villas and terraces.
We will suggest stain or sealer and quote per square metre.