Slab Anchors and Support Hooks
Heavy-duty anchors fixed into the concrete slab. They carry chandeliers and heavy pendants. Gypsum is never trusted with the weight.
Al Salam Tower, Office 15B, Al Barsha, DubaiEvery day, 8am to 10pm
New lighting changes the feel of a room more than almost anything else. We install pendants over kitchen islands, chandeliers in double-height villa halls, spotlights, wall lights and bathroom fittings, safely wired, securely fixed and hung at the right height.
Hanging Guide
| Fixture | Where | Recommended Height |
|---|---|---|
| Pendant Over Kitchen Island | Centred over the worktop | 75 to 90 cm above the counter |
| Pendant Over Dining Table | Centred over the table | 70 to 85 cm above the table top |
| Chandelier in a Hall | Centre of the space | At least 2.1 m clear above the floor |
| Wall Lights | Living rooms and corridors | About 1.6 to 1.7 m from the floor |
| Bathroom Mirror Lights | Either side or above the mirror | Around face height for even light |
Most Dubai apartments have gypsum false ceilings, and a gypsum board alone cannot carry a heavy pendant or chandelier. We fix heavy fittings into the concrete slab above or add a timber support, so the light hangs safely for years.
Double-height halls and stairwells in villas need tall ladders or scaffold towers for chandeliers. We plan these jobs in advance and bring the right access equipment.
Pair new lighting with the right controls. See outlet, switch and dimmer installation for LED-compatible dimmers, ceiling fan installation for fans with lights, and smart lighting installation for app control.
Heavy Chandelier?
Tell us the weight before the visit. Fittings over about 10 kg need a dedicated support fixed into the slab.
Dimmable LEDs
Not every LED bulb dims smoothly. We check bulbs and dimmers are compatible to avoid flicker and buzzing.
Light the Room
Good lighting makes a home feel finished, and heavy fittings need to be hung properly to stay safe.
We fix pendants and chandeliers into the slab or a timber support, set them at the right height and test them with your switches and dimmers.
Installation
We check the ceiling type and the existing point, and confirm the fixing can carry the weight of the fitting.
The circuit is isolated and tested dead. The old fitting is removed and the connections inspected.
Heavy fittings get a proper support into the slab or a timber batten. The fitting is connected and earthed.
The fitting is levelled, the height adjusted and the circuit tested with the light on and the dimmer, if fitted.
Installing a light fitting on an existing point starts from AED 80. Heavy chandeliers, high ceilings and multi-light clusters are priced by weight, height and the support needed. Prices vary and can change depending on your exact requirements, the materials and access to the property, so the final price is confirmed after we see photos or visit.
Installing a ceiling fan on an existing light point with a fan-rated box starts from AED 180. Fans that need a new support or a longer down rod for high ceilings cost more. Prices vary and can change depending on your exact requirements, the materials and access to the property, so the final price is confirmed after we see photos or visit.
Yes. We install ceiling lights, pendants, chandeliers, spotlights, wall lights, exhaust fans and ceiling fans on existing points, and connect appliances to existing outlets.
We replace and repair switches, sockets, dimmers and light fittings, install ceiling and exhaust fans, check circuit breakers and RCDs, and trace common faults such as tripping circuits and flickering lights. New circuits and distribution board changes are referred to a DEWA-approved contractor.
A standard ceiling or wall light takes 30 to 45 minutes. Chandeliers and pendant clusters can take two to four hours.
Pricing Guide
Light fittings are priced per item, with heavy and high installations priced by weight and access.
*Prices shown are starting guides only. They vary and can change depending on your requirements, the size of the job, the surface, the materials and access to your building. You agree the final price before any work begins.
Ceiling or wall light.
From AED 80*
Height adjusted.
From AED 120*
Slab support where needed.
Quoted by weight
Like-for-like.
From AED 40* each
Tools and Materials
Heavy-duty anchors fixed into the concrete slab. They carry chandeliers and heavy pendants. Gypsum is never trusted with the weight.
Battens fixed above gypsum ceilings to spread the load. They support medium-weight fittings. They are hidden once installed.
Secure, insulated connectors for every wire. Connections stay tight. Loose joints are avoided.
Dimmers designed for LED loads. They prevent flicker and buzzing. Lights dim smoothly.
Based in Al Barsha since 2014, we work across every Dubai community with trade-specialist technicians and a workmanship guarantee on every job.
Heavy lights are fixed into the slab or a support. They never hang from gypsum alone. Your chandelier stays put.
Pendants and chandeliers are set at the correct height for the space. The room looks balanced. Nobody bumps their head.
We bring scaffold towers for double-height spaces. Work is done safely at height. No risky ladder balancing.
Lights are tested with switches and dimmers. Flicker and buzz are sorted. Everything works as it should.
We install light fixtures in apartments, villas and offices across Dubai.
Based at Al Salam Tower, Office 15B, Al Barsha First
Dubai Marina, JBR, JLT, Palm Jumeirah, Al Sufouh, Discovery Gardens, Al Furjan
Downtown Dubai, Business Bay, DIFC, Jumeirah, Umm Suqeim, Al Barsha, Tecom, The Greens
Arabian Ranches, Dubai Hills Estate, Emirates Hills, The Springs, The Meadows, Damac Hills, Motor City, Sports City, JVC, JVT, Town Square
Deira, Bur Dubai, Mirdif, Al Warqa, Silicon Oasis, Al Qusais
Include the weight if you know it. We will confirm the fixing and price.