Matching Parquet
Same species and size. Seamless. Strong.
Al Salam Tower, Office 15B, Al Barsha, DubaiEvery day, 8am to 10pm
Parquet Floor Repair
A split plank, a burn, a pet stain or a block blackened by water can spoil an otherwise good floor. We cut out the damaged planks or blocks and replace them with matching timber, then sand and finish the area so the repair blends in.
The best match is timber from the same floor. Spare blocks left after installation, or blocks taken from inside a wardrobe, give a near-perfect repair.
New timber is lighter at first. We stain and seal to match, and the colour settles further over the following months.
For scratches, see parquet repairs. For loose blocks, see loose block re-fixing, and for water, parquet water damage repair.
01 / Process
We match species, size and grain, often using spare blocks or offcuts.
The damaged block is cut out without disturbing neighbours.
The new piece is bonded flush in the existing pattern.
The area is sanded, stained and sealed to match.
02 / Damage
Likely cause: Water or pet urine reacting with timber.
What we do: Block replaced, finish blended.
Likely cause: Impact or movement.
What we do: Plank replaced and bonded.
Likely cause: Heat or embers.
What we do: Damaged timber replaced.
Likely cause: Long-term moisture.
What we do: Moisture fixed, block replaced.
Seamless Repair
Badly damaged blocks need replacing to restore the floor.
We match the timber, keep the pattern and blend the finish.
Pricing Guide
Replacement is priced per area.
| Job | Starting Price* | What Affects the Price |
|---|---|---|
| Small Area | From AED 250* | A few blocks. |
| Larger Area | Quoted per m² | Replaced and finished. |
| Matching Timber | Quoted by species | If no spares. |
| Room Refinish | From AED 35*/m² | For perfect match. |
*Prices shown are starting guides only. They vary and can change depending on your requirements, the size of the job, the surface, the materials and access to your building. You agree the final price before any work begins.
Tools and Materials
Same species and size. Seamless. Strong.
Bonds new blocks. Flexible. Quiet.
Blend new timber. Matched colour. Neat.
Matches the existing finish. Protected. Even.
Based in Al Barsha since 2014, we work across every Dubai community with trade-specialist technicians and a workmanship guarantee on every job.
Repairs blend into the floor. Seamless. Professional.
Herringbone and chevron repaired precisely. Clean. Neat.
Moisture or damage source checked. No repeat. Lasting.
Refinish suggested when matching needs it. Clear. Fair.
Most parquet can be restored. Loose blocks are re-fixed, damaged ones replaced, then the floor is sanded back to fresh timber, gaps filled and resealed with lacquer or oil. Engineered parquet can usually be sanded a few times depending on its wear layer.
Yes. Full restoration includes sanding back to clean timber, filling, staining if wanted and sealing. Light refreshes can use a screen and recoat without full sanding.
In busy Dubai homes, a maintenance polish or recoat every 12 to 24 months keeps the finish protected. Full sanding is only needed when the finish is worn through to bare wood.
Parquet repair visits start from AED 300. Sanding and refinishing starts from about AED 35 per square metre, and new parquet installation from about AED 150 per square metre supplied and fitted. Prices vary and can change depending on your exact requirements, the materials and access to the property, so the final price is confirmed after we see photos or visit.
Areas We Cover
We replace damaged parquet across Dubai.
We will check matching timber and quote.