Gate and Hinge Welding
Snapped hinges, cracked frames and broken latches welded back on site. The repair is ground smooth and primed. The gate is rehung and tested.
From AED 300*
Welding and Metal Fabrication in Dubai
Steel gates and fences fail at their welds. Hinges snap off, joints crack and rust eats through bottom rails. We weld repairs on site with portable equipment and fabricate replacement sections, railings and brackets in the workshop.
- 01Starting Price: AED 300*
- 02Gate weld repairs
- 03Hinges re-welded
- 04Rusted sections replaced
What We Weld
Welding and Fabrication for Dubai Villas
Rusted Section Replacement
Rusted bottom rails and bars cut out and replaced with new steel. It is cheaper than a new gate. The repair is painted to match.
Railings and Balustrades
Staircase, balcony and roof railings repaired or fabricated. Heights and spacing follow safety guidance. They are finished in your colour.
Brackets and Frames
Custom brackets, AC frames, shade frames and supports. They are made to measure in the workshop. Galvanised or painted for outdoor use.
Welding Repairs That Last Outdoors
A weld is only as good as the finish over it. Bare welded steel starts rusting within days in Dubai's humidity, so every repair is primed and painted the same visit.
Some communities and buildings require a hot work permit before welding. We check access rules with you and arrange the work so the permit and safety measures are in place.
For repainting the whole gate, see fence repainting and sealing. For hinges, see hinge and latch repair, and for security upgrades, security reinforcement.
Fire Safety
We keep a fire extinguisher at hand and a fire watch after hot work.
Aluminium
Aluminium welding needs different equipment. Ask us before booking.
Strong Joints
On-Site Welding and Workshop Fabrication
Broken welds and rusted steel weaken gates, fences and railings.
We weld repairs on site and fabricate replacement sections, then prime and paint so they last.
- Weld repairs
- Rust sections replaced
- Railings
- Brackets
Process
How On-Site Welding Repairs Are Done
- 01
Inspect and Protect
We check the damage and protect nearby surfaces, plants and cars from sparks.
- 02
Prepare
Rust and paint are ground back to clean steel for a strong weld.
- 03
Weld
The joint is welded and ground smooth to blend with the frame.
- 04
Protect
Rust-inhibiting primer and paint are applied so the repair lasts.
Welding and Metal Fabrication: FAQs
How Much Does Welding and Metal Fabrication Cost in Dubai?
On-site welding repairs start from AED 300. Fabricated sections, railings and brackets are quoted by design and size. Prices vary and can change depending on your exact requirements, the materials and access to the property, so the final price is confirmed after we see photos or visit.
How Much Does Gate Repair Cost in Dubai?
Gate and fence repair visits start from AED 200. Motors, hinges, rollers and welding are quoted once the gate has been inspected. Prices vary and can change depending on your exact requirements, the materials and access to the property, so the final price is confirmed after we see photos or visit.
Why Is My Automatic Gate Not Opening or Closing?
The most common causes are a dead remote battery, blocked or misaligned safety sensors, a tripped power supply, a failed capacitor or a gate that has dropped and binds on its track. Most are fixed in one visit.
Should I Repair or Replace an Old Gate Opener?
Repair makes sense when the motor is sound and the fault is a control board, capacitor, sensor or remote. Replacement is better when the gearbox is worn, parts are no longer available or the motor is too small for the gate.
How Long Does a Welding Repair Take in Dubai?
Most on-site weld repairs take two to four hours including priming. Fabricated pieces take several days in the workshop.
Pricing Guide
Welding Cost in Dubai
On-site welding is priced per visit. Fabrication is quoted by design.
| Job | Starting Price* | What Affects the Price |
|---|---|---|
| On-Site Weld Repair | From AED 300* | Primed same day. |
| Hinge Re-Weld | From AED 300* | Per hinge. |
| Rusted Section Replacement | Quoted on inspection | Per section. |
| Custom Railing | Quoted by design | Per metre. |
*Prices shown are starting guides only. They vary and can change depending on your requirements, the size of the job, the surface, the materials and access to your building. You agree the final price before any work begins.
- Damage inspected
- Area protected
- Rust ground back
- Joint welded
- Weld ground smooth
- Primer applied
- Topcoat applied
- Fire watch
Tools and Materials
Tools, Materials and Products We Use for Welding
Portable Welding Equipment
Inverter welders for on-site work. Repairs happen in place. No gate removal.
Mild and Galvanised Steel
Steel sections to match existing work. Strong. Finished for outdoor use.
Zinc-Rich Primer
Protects welds against rust. Paint grips well. Long-lasting repair.
Spark Blankets
Protect cars, plants and floors. No burn marks. Safe working.
Why Choose Wamtech Services for Welding in Dubai
Based in Al Barsha since 2014, we work across every Dubai community with trade-specialist technicians and a workmanship guarantee on every job.
On-Site Repairs
Most welds happen at your property. No gate removal. Faster.
Finished Properly
Every weld is primed and painted. No early rust. Repairs last.
Safety First
Surfaces protected and fire watch kept. No damage. Permits respected.
Workshop Backup
Larger pieces are fabricated in the workshop. Clean finish. Made to measure.
More Fence and Gate Repair Services in Dubai
All Fence and Gate Repair Services- Fence and Gate Panel Replacementgate motorsView service
- Loose/Sagging Fence and Gate Fixesgate motorsView service
- Post/Picket/Rail Repair and ReplacementAvailable across DubaiView service
- Hinge/Latch/Lock/Hardware RepairAvailable across DubaiView service
- Automatic and Electric Gate Repairgate motorsView service
- Fence Repainting/Staining/SealingAvailable across DubaiView service
- Security Fence and Gate Reinforcementgate motorsView service
- Emergency Fence and Gate Repairsgate motorsView service
- New Fence and Gate Installationgate motorsView service
Welding Across Dubai
We carry out welding repairs at villas and properties across Dubai.
Based at Al Salam Tower, Office 15B, Al Barsha First
New Dubai and the Coast
Dubai Marina, JBR, JLT, Palm Jumeirah, Al Sufouh, Discovery Gardens, Al Furjan
Central Dubai
Downtown Dubai, Business Bay, DIFC, Jumeirah, Umm Suqeim, Al Barsha, Tecom, The Greens
Villa Communities
Arabian Ranches, Dubai Hills Estate, Emirates Hills, The Springs, The Meadows, Damac Hills, Motor City, Sports City, JVC, JVT, Town Square
Old Dubai and East
Deira, Bur Dubai, Mirdif, Al Warqa, Silicon Oasis, Al Qusais
Send Photos of the Broken Weld
We will confirm whether it can be welded on site.